Hp 7400c Scanner Not Found HP Scanjet 7400C Problems - Scanner Could Not Be Initialized?
HP Scanjet 7400C problems - scanner could not be initialized? - hp 7400c scanner not found
I bought a 2nd Hand 7400C scanner and can not install on a laptop - Windows XP operating system.
Error message - "Sorry, scanner could not be initialized (Scanner not found)"
That's what I've done / found so far ....
- Downloaded all the software / drivers from the HP website
- Note that the laptop found and installed the scanner found and installed (and the beginning, and it appears in My Computer
- Find the error in the HP Web site, the problems with the installation of remote LAN recommends ... adopted by the recommended procedure, but I think yours is the problem that LAN install "inactive" and not in regedit
- He tried a different USB port
- Cable OK as I put the scanner in the works
- Let the software uninstalled twice (HP PrecisionScan Pro 3.02)
- Scanner is already showing on the LCD after initalizing
Not sure what to try that next - Need Advice?
Thanks in advance Phil
|
1 comments:
> Utility Windows Download Cleaup Microsoft.com
Download and save the Windows Installer Cleanup Utility to run the desktop after the file to your desktop and double click the file.
> Now, disconnect the USB printer cable to the back of the computer.
> Click on Start> Programs> Windows Cleanup Utility and delete all entries related to HP in the cleaning utility.
Delete> So all HP related entries from Add / Remove Programs (if applicable).
> Now click Start> Run> type command from the Run "and press OK
> Open the Windows Folder Options> Click the View tab> click on the files and folders> click OK.
Now click on Start> My Computer> C:> Programs> HP folder and delete it.
>> Now restart the computer.
After restarting the computer> Download the software from the HP website> Save on the desktop.
> After successfully saving the file to your desktopBe a superior double room runs on the file.
NOTE: Keep the USB cable is disconnected during the installation and connect only when the software prompts you to get in touch.
If the problem persists after following these steps, click Start> Control Panel> Scanner and Camera Wizard> Scanning and try from there, if you will be able to obtain from Scanner and Camera Wizard scan confirmed that the bidirectional communication between printer and computer well.
> If you can not scan from the Scanner and Camera Wizard, May is the problem with the USB drivers on your computer.
Uninstall and reinstall the USB computer.
Post a Comment